Not legal for trade

Knowing what does not legal for trade mean is helpful in a business setting. Scales that are legal for trade are often those which are meant for the manufacturer to use for commercial purposes where an item is sold according to weight. The definition of commercial applications can differ slightly based on measures jurisdictions and varying weights. Balances that are legal for trade often cost more than not legal for trade. This is because extended testing is needed to get a Certificate of Conformance.

Why are industrial scales rejected for legal-for-trade use?

Measurement Canada, an agency of Industry Canada, ensures that goods and services are measured accurately by:. Under the Weights and Measures Act and the Electricity and Gas Inspection Act , weighing and measuring devices — including scales, gasoline dispensers and large petroleum meters — used for trade in Canada must meet stringent standards. By law, Measurement Canada can periodically inspect devices and certain packages of commodities to ensure that you're fulfilling your responsibilities.

While Measurement Canada inspectors and Authorized Service Providers conduct periodic inspections, owners and users remain legally responsible for the accuracy of their weighing and measuring devices. Since accuracy is so important, you should also check your scales and meters daily during operation to make sure that they are properly maintained. In addition, any staff using the devices should be trained to ensure that the devices are used correctly and accurately.

While the accuracy of your measuring devices is your responsibility, Measurement Canada also plays an important role by enforcing standards of accuracy across the country. That's why you can expect that some day a Measurement Canada inspector or Authorized Service Provider will pay you a visit. Measurement Canada inspectors perform follow-up inspections to ensure that the work done by Authorized Service Providers is adequate. They also carry out investigations, including on-site visits and inspections, resulting from consumer complaints.

Recommended periodic certification frequency will vary based on the trade sector in which the device is used. Details about your specific device can be found on Measurement Canada's website. Any weighing or measuring device found to be inaccurate — whether it's in the favour of the buyer or the seller — will need to be repaired. Depending on the degree of inaccuracy, you may be required to take the defective device out of service until the necessary repairs can be made. There are many service companies that can repair weighing and measuring devices.

Those that are Authorized Service Providers can also inspect and certify devices, and affix a government sticker immediately after the device has been brought back into compliance. Accuracy: It's Your Responsibility Measurement Canada, an agency of Industry Canada, ensures that goods and services are measured accurately by: requiring that measuring equipment used in trade be approved and inspected; investigating complaints received from businesses and consumers who believe they have not received accurate measures; requiring that standards be calibrated and certified; and administering and enforcing the Weights and Measures Act and the Electricity and Gas Inspection Act.

Device Accuracy Under the Weights and Measures Act and the Electricity and Gas Inspection Act , weighing and measuring devices — including scales, gasoline dispensers and large petroleum meters — used for trade in Canada must meet stringent standards. In order to satisfy this requirement, you should ensure that your devices: have been approved, inspected, and certified before you use them.

If your device does not already have a valid inspection sticker or certificate, you can obtain one by having the device inspected by Measurement Canada staff or by an Authorized Service Provider are appropriate for their intended uses. Many scales and meters are designed with different features and capacities for measuring certain kinds of commodities, such as precious metals scales for weighing gold and silver, dispensers for measuring propane, and vehicle scales for weighing trucks and trains; are properly installed and protected from environmental interferences; are used in a manner that ensures accurate measurement; and clearly indicate the weight or measure.

Inspection Visits While the accuracy of your measuring devices is your responsibility, Measurement Canada also plays an important role by enforcing standards of accuracy across the country.

Inaccurate Device? It Needs To Be Fixed!

The definition of commercial applications can differ slightly based on measures jurisdictions and varying weights. What Is the Nature of Legal for Trade? Balances. In this scenario, the customer is unknowingly paying for goods which they are not receiving due to the provision of incorrect data. Legal for trade approved.

JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website. In , there were Trading Standards Inspectors of Weights and Measures , who could visit your business at any time - and penalise you for failing to use Approved scales. But what are the reasons a scale might be rejected by Trading Standards for legal-for-trade use? Marsden explains.

Do I need a commercial scale which is approved and Legal-for-Trade in order to conduct business? If your business buys or sells any commodity or service by weight you are required to have an approved, legal for trade device on which to conduct sales by weight.

Certified scales are required when weighing any product and selling it directly to the customer based on the weight provided. Department of Weights and Measures officials can perform audits on weighing devices to ensure that they are legal for trade with proper inspections.

Коммерческое использование

By keeping weight measurements as accurate possible, all stakeholders of a transaction will be protected from the damaging effects of misinformation. For instance, customers can be deceived into overpaying for a specific good which is being advertised with a higher weight than what they are actually provided with. In this scenario, the customer is unknowingly paying for goods which they are not receiving due to the provision of incorrect data. Legal for trade approved equipment alleviates this issue by establishing a set of standards which helps businesses to be supplied with honest technical information on the equipment they are purchasing. In addition, legal for trade certification can only be issued by specific individuals who are able to provide an honest and impartial analysis of the equipment they are testing. Businesses from all sectors can be affected by the disclosure of inaccurate weighing measurements both directly and indirectly.

What Does Not Legal for Trade Mean

Our vehicle scale weighbridges are tough, dependable and built to last, especially in harsh industrial environments. Our weighbridges are tough, dependable and built to last, even in harsh industrial environments. Within potentially explosive manufacturing and processing environments, installing the proper intrinsically safe weighing equipment certified to operate in hazardous zones is crucial. The legal responsibility for protecting workers at risk from explosive atmospheres lies with employers. Part of this responsibility involves an ongoing duty to regularly inspect and maintain equipment to prevent health and safety risks. We provide standard and UKAS accredited testing and calibration services, removing the risk of inaccurate measurements, product failures and accidents. Avery Weigh-Tronix weighbridges are tough, dependable and built to last, even in harsh industrial environments. Robust, accurate and built to last, these floor scales are available in a range of sizes and capacities to suit every application. We offer a wide range of industrial weighing systems and solutions, backed by an extensive service network across the entire UK. Part of a large corporate family, with years experience, we market and service our products in over 80 countries across the globe.

There are a number of questions we get from time to time regarding legal for trade scales. Defining a commercial weighing application can sometimes be a little tricky.

Ok…no second guessing here. We want to be clear, so as to remove any doubt or uncertainty you may have in making this determination. Legal-for-Trade scales are intended for commercial use applications, meaning that money is exchanging hands on the basis of the product weight.

Nationwide Service, Calibration and Repair

You can see all the legal for trade scales we offer HERE. Legal for trade scales evaluation are performed on the design of the device, operation, environmental factors and marking requirements. A load of approximately one-half capacity is applied to the scales at least , times. The stringent testing requirements are usually only achieved in high quality balances incorporating the use high quality electronic components and superior engineering. Precision Weighing Balances offers a huge selection of "Legal for Trade" balances. Many people ask - why should I buy a weight measurement instrument that is "Legal-for-Trade" when I don't intend to use the balance in a commercial weighing application? In our opinion, when you purchase a "Legal-for-Trade" balance you will know you are getting a quality precision weighing balance that has undergone independent testing to verify the unit meets the manufacturer's specifications. If there is a comparable model built by another manufacturer why wouldn't they attempt to achieve "legal-for-trade" status? Is the reason they typically can't pass the requirements? Take a look at some of the other scale manufacturers and if you see that they don't offer any "legal-for-trade" scales it is usually since they can't produce a quality balance that can meet the stringent test.

Measurement Canada, an agency of Industry Canada, ensures that goods and services are measured accurately by:. Under the Weights and Measures Act and the Electricity and Gas Inspection Act , weighing and measuring devices — including scales, gasoline dispensers and large petroleum meters — used for trade in Canada must meet stringent standards. By law, Measurement Canada can periodically inspect devices and certain packages of commodities to ensure that you're fulfilling your responsibilities. While Measurement Canada inspectors and Authorized Service Providers conduct periodic inspections, owners and users remain legally responsible for the accuracy of their weighing and measuring devices. Since accuracy is so important, you should also check your scales and meters daily during operation to make sure that they are properly maintained. In addition, any staff using the devices should be trained to ensure that the devices are used correctly and accurately. While the accuracy of your measuring devices is your responsibility, Measurement Canada also plays an important role by enforcing standards of accuracy across the country. That's why you can expect that some day a Measurement Canada inspector or Authorized Service Provider will pay you a visit.